Model 600 & 600v- Multi-Purpose Valve Testing System Options
PATENTED EASY OUTTM SEAL HEAD HOLDERS are designed to change seal plates for socket weld, butt weld, threaded, bore seal or special end connections.
90 DEGREE ROTATION designed to rotate the clamp fi xture from the horizontal to the vertical position for hydrostatic valve testing.
GAUGE CALIBRATION PORT installed as an alternate pressure port to use as a gauge calibration port, gas inlet or monitor point for additional gauge or script chart recorder.
SAFETY INTERLOCK circuit installed on the hydraulic clamp circuit to lock hydraulic pressure if there is a system failure.
BI-DIRECTIONAL TEST CIRCUIT installed inside the control console to change the fl ow of air and water without changing hoses.
DATA ACQUISITION AND ANALYSIS SYSTEM (DAAS) is designed to measure pressure and time with PC based hardware and software.
BUBBLE JAR manufactured to ANSI B16.104 for seat testing with air.
DRIP TUBE manufactured to API 598 for seat testing with water.
DC POWER SUPPLY provided in 0 to 24 volt for input voltage to valve actuators that require a supply voltage to open the actuator.
0 to 100 psi AIR ACTUATOR CIRCUIT provided for input pressure to valve actuators that require a supply of air to open the actuator.
0 to 100 psi AIR POSITIONER CIRCUIT provided for input pressure to valve positioner that require a supply of air to position the actuator.
FLOW PANEL provided with 0.05 to 1800 SCFH leak detection.
RECIRCULATION SYSTEMS provide a closed circuit system for recirculation of the test medium.
- Standard recirculation system (2 to 4 gpm)
- Quick Fill recirculation system (8 to 10 gpm)
- 30, 50, 80 & 100 gallon reservoirs standard
