Pneumatic or Hydrostatic Valve Testing System - Model 1500, Patented Hydraulic Flange Seals
Our 1500 series patented Hydraulic Flange Seal clamp fixtures seal the opposite end of flanged valves when attached to the Model 1200 or 1400 series valve test clamp fixtures. Shell testing can be performed when used in combination so the valve does not have to be blind flanged or the valve does not have to be turned over and re-clamped for seat testing form both sides.
Our patented 1500 series Hydraulic Flange Seals compliment our Model 1200 and 1400 series valve testers as well as being used as standalone components for pressure testing. The Hydraulic Flange Seals clamp on the back side of flanges for an easy, quick and safe way to test valve, pipe, vessels or any other component using a flanged outlet.
These Patented ANSI Hydraulic Flange Seals are designed to conform to the clamping requirements as specified in API-598, API-6D and API-6A.
Model No. 1500-4
This flange seal will clamp and test the following valves:
- 2” Class 150, 300, 600, 900, 1500
- 3” Class 150, 300, 600, 900
- 4” Class 150, 300, 600
Model No. 1500-6
This flange seal will clamp and test the following valves:
- 2” Class 2500
- 3” Class 1500, 2500
- 4” Class 150, 300, 600, 900
- 6” Class 150, 300, 600
Model No. 1500-10
This flange seal will clamp and test the following valves:
- 2” Class 2500
- 3” Class 2500
- 4” Class 900, 1500, 2500
- 6” Class 300, 600, 900
- 8” Class 150, 300, 600
- 10” Class 150, 300
Model No. 1500-14
This flange seal will clamp and test the following valves:
- 8” Class 600
- 10” Class 150, 300
- 12” Class 150, 300
- 14” Class 150
Model No. 1500-16
This flange seal will clamp and test the following valves:
- 6” Class 1500
- 8” Class 900
- 10” Class 600
- 12” Class 150, 300
- 14” Class 150, 300
- 16” Class 150, 300
