Welcome

Model 1400 & 1400 API -Model 1400 Series System Options

SAFETY INTERLOCK circuit installed on the hydraulic clamp circuit to lock hydraulic pressure if there is a system failure.

BI-DIRECTIONAL TEST CIRCUIT installed inside the control console to change the flow of air and water without changing hoses.

DATA ACQUISITION AND ANALYSIS SYSTEM (DAAS) is designed to measure pressure and time with PC based hardware and software.

BUBBLE JAR manufactured to ANSI B16.104 for seat testing with air.

DRIP TUBE manufactured to API 598 for seat testing with water.

PATENTED MODEL 1500 HYDRAULIC FLANGE SEALS for ANSI flanges.
Model 1500-4 Hydraulic Flange Seal
Model 1500-6 Hydraulic Flange Seal
Model 1500-10 Hydraulic Flange Seal
Model 1500-14 Hydraulic Flange Seal
Model 1500-16 Hydraulic Flange Seal

PATENTED MODEL 1500 HYDRAULIC FLANGE SEALS for API flanges.
Model 1500-2-API Hydraulic Flange Seal
Model 1500-3-API Hydraulic Flange Seal
Model 1500-4-API Hydraulic Flange Seal

RECIRCULATION SYSTEMS
Standard recirculation system (2 to 4 gpm)
Quick Fill recirculation system (8 to 10 gpm)
30, 50, 85 & 100 gallon reservoirs standard

pneumatic valve testing

Download PDF File
  • 1400
    • Air operated pump with 3,000 or 10,000 psi
      hydrostatic test circuit.
    • Three (3) arm or four (4) arm clamp arrangement.
    • 100 ton or 165 ton hydraulic clamping.
    • One (1) “O” ring seal plate, carbon steel, nickel
      plated.
    • Carbon Steel powder coated for wear resistance.
  • 1400 API
    • Air operated pump with 10,000, 15,000 or 22,500 psi hydrostatic test circuit.
    • Four (4) arm clamp arrangement.
    • 165 ton, 300 ton or 400 ton hydraulic clamping.
    • One (1) carbon steel, nickel plated, seal plate for RTJ adapter plates.
  • Standard Features for 1400 & 1400 API
    • Air operated pump with 10,000 psi hydraulic clamp circuit.
    • Non-rotating or 90 degree rotating clamp fixture.
    • One skid mounted clamp fixture for fork lift movement only.
    • One skid mounted control console for fork lift movement only.
    • Aluminum or Stainless Steel panel face.
    • 4” or 6” top mounted pressure gauges with quick disconnect. 0.5% accuracy.
    • Gauge Calibration Port installed as an alternate pressure port.

Calder Testers

Calder Testers, Inc.

9000 Monroe
Houston Texas, 77061
Voice: (888) 704-TEST (8378)
Fax: (713) 944-2982

Specifications subject to change without notice www.caldertesters.com

Copyright © Calder Testers 2009. All Rights Reserved.

                                        Hydrostatic Valve Testing and Pneumatic Valve Testing Experts